Keep informed on new products and special offers.
LightHouse MAX Grow Tent 200 x 200 x 200cm
£349.00 incl. Vat
LightHouse® MAX is the premium tent, for the grower who wants no compromises. It offers a durable, heavy duty frame that incorporates metal corners, the thickest, strongest poles on the market and multiple choices of ducting and cable glands all with double seals.
The attention to detail in the design of the LightHouse® range extends through both the premium LightHouse® MAX and the budget LightHouse® LITE.
Size: 2m x 2m x 2m
Pole size: 25mm
4 options on air out, through the roof or side
2 x one piece waterproof insert tray
1 x base side air in with a 300mm (12”) ducting gland
4 x inline 300mm (12”) socks for use with air-cooled lighting
4 x 100mm (4”) cable glands
6 x passive air fine (anti-mite) mesh vents at base with light-proof covers when not in use
2 x side doors, plus large rear door for easy access to crop
8 x Filter straps
Ideal for 5 large plants or 16 mid-size plants
For four lamp set up – 4 x 400w HID
Exhaust fan around 1100m3
This tent will hold a fan inside the 300mm socks. On this model, access from the front can either be by using the two inner curved doors or if full access is required, just zip the entire front off!
Additional MAX Features:
Strong, reliable poles with welded metal corners
LightHouse® MAX frames are some of the best on the market, benefitting from metal welded corners and 22mm to 25mm diameter steel poles for the ultimate in strength
Aperture covers for full light-proofing when the larger apertures are not in use. Larger MAX models also feature low level air intake fan sock – more controllable airflow
LightHouse® MAX Core Specification:
Heavy duty Tri Layer 600 Denier material with the special LightHouse® UltraLux reflective liner
Quality Tivax double lined zips that are easy-to-use with no snagging and offering good light-proofing
Frame – 22mm or 25mm steel poles with welded metal corners – offering ultimate strength and durability
All outlets for air and cables are double lined and light tight with pull toggles on each lining
All larger air out socks benefit from outer attachable Velcro covers to stop light when not in use
Roof poles with rubber ends for strong grip
One piece waterproof insert tray
Velcro handy straps for securing cables and wires
Door clips on all doors for fastening when open
Supplied in a strong fabric carry bag
Both benefit from a new reflective material called UltraLux, which offers up to 30% higher reflectivity over traditional products, while the Tivax zips fitted to all door have proven ability to offer a quality seal when closed.
100 in stock
LightHouse LITE is the budget tent for the grower who wants no frills.
It offers a simple and lightweight frame that incorporates nylon corners but still has multiple choices of ducting and cable glands all with double seals. The main frame is made from 16mm steel poles and has nylon corners. It is made of Tri-Layer 210 Denier material with a new reflective liner called UltraLux which offers up to 30% high reflectivity over traditional products; while the Tivax zips fitted to all doors have proven ability to offer a quality seal when closed.
The LightHouse LITE 1.5m² Tent has extraction through the roof with a 250mm (10") sock and 2 x inline 250mm (10") socks for use with air-cooled lighting. There are also 2 x low level passive air vents with fine (anti-mite) mesh and it also includes light proof covers for when they are not in use. It is for a single lamp set up (1000w HID) and an extraction fan of minimum 125mm.
LightHouse CLONE 1
The unit can be used as a propagation tent or turned upright to be used as a small grow tent in it's own right. It has extraction via two 100mm (4") socks and a passive air vent fitted with fine (anti-mite) mesh. It comes with an integral waterproof tray. This tent is made from Tri Layer 210 Denier material with special LightHouse UltraLux reflective liner and quality Tivax double lined zips that are easy to use and offer good light proofing with no snagging. The main fram is made from 16mm steel poles with nylon corners.
0.7m x 0.5m x 0.9m (when on long edge as propagation tent)
LightHouse MAX is the premium tent for the grower who wants no compromises.
It offers a durable and heavy duty frame that incorporates metal corners and the thickest and strongest poles on the market with multiple choices of ducting and cable glands all with double seals. It is made of heavy duty Tri-Layer 600 Denier material with a new reflective liner called UltraLux, which offers up to 30% high reflectivity over traditional products and it has Tivax zips that are fitted to all doors and have a proven ability to offer a quality seal when closed.