0114 2458 581
sales@acornhorticulture.com
65 Deep Ln, Sheffield S5 0DU
13 Amp Control Freak Dynamic Frequency Fan Controller
£395.00 incl. Vat
Cut energy costs & prolong the life of fans without any buzzing! Get your hands on a Control Freak! It’s a real smooth operator!
It won’t clip or distort your wave form like other AC fan controllers – it changes your frequency.
This means fans last longer, you save energy and there’s no noise – not even buzzing – it’s freaky!
It’s easy to reach and stay within your target temperature – there are 90 fan speedssettings (from 10 – 100%)! Your fan will move through speeds smoothly.
For complete control, you can change your bandwidth (hysteresis). Set a tight bandwidth for precise temperature control. Or set a loose bandwidth for a smoother speed.
- 2 x sockets (for intake & extraction fan)
- Silent – no buzzing!
- Low power – especially at slower speeds – mega savings ahead!
- 90 fan speeds (from 10-100%) for super smooth speed control
- Extends fan life
- Smart remote temperature probe (in light shielded case + 4.5m cable)
- Easy to Use – Plug & Play!
- Easy to Read! Large LCD display
- Lightweight
- 3A & 7A models available
- Improves safety of fan operation
Save Energy
You use far less power at a slower speed – your power use drops by as much as your fan speed. So when running fans 50% slower, you use 50% less power. Most fan controllers use way more power than this!
90 Speed Settings
Connect Multiple Fans
Bandwidth Control
Use a tight bandwidth to keep your temperature closer to your target. Or set a wider bandwidth to keep your fans moving smoothly.
Easy To Use & Set Up
5 in stock
You must be logged in to post a review.
Related products
VariiSpeed Fan Controller
Systemair Revolution Stratos AC Silenced Fans
Revolution Silenced
G.A.S Balancer for Systemair EC Fan Controllers and Fans
16″ Wall Fan
Control Freak Intelligent Digital Single Fan Controller with Probe
- Plug the fan into the controller and set the minimum fan speed.
- Plug the controller in a socket and turn on.
- Plug the fan into the controller and set the minimum fan speed.
- Plug the temperature probe into the controller and set desired room temperature.
- Place the sensor in the centre of the grow room – never in direct airflow of the fan.
- Plug the controller into a socket and turn on.
Reviews
There are no reviews yet.